Strong Arm Reinforcement Plate (Set of 4)
Strengthens the arm on the P3
Distributes the stress over larger area
Incorporates all 6 screws
Everything included in kit
Made in USA
AVAIL IN 2 COLORS-PLEASE CHOOSE
Many P3 owners have reported cracks around the motor mount and or around the two torx screws that hold the shell together. This may be due to the increased torque generated by the DJI Phantom 3's beefier motors. The plastic in this area of the arm is very thin.
To prevent cracking and or separation of the lower shell half, the Strong Arm reinforcement plate ties all six screws together and distributes the forces across the plate instead of focusing the force in the recessed area around the screws.
What you get:
4 reinforcement plates
8 M2.5 screws
16 M3 screws
What you will need:
2mm hex driver
1.5mm hex driver
DJI has requested that all Phantom 3 owners that have cracks in their shell return the product to their repair center for evaluation. Avoid the long wait while your Phantom 3 sits waiting for repairs, install the Strong Arm reinforcement plate.
Cost for new shell...$60-$70 if you replace it yourself.