PHANTOM 3 SUBFRAME FOR THE ADV/PRO
With the introduction of the Phantom III advanced and professional, it became quite evident very early on that DJI was either using cheaper material for the shell or was making it thinner then the original Phantom 2. Pilots worldwide for reporting stress cracks right underneath the motor.
The twisting of the Phantoms arms is the root cause for the cracks of forming in the phantom shell, especially around the motor mounts and inside the screw wells.
Until DJI designs and delivers a thicker or stronger body shell, the new Phantom Subframe is the surest way to prevent the the failure of the plastic shell.
Some owners have already replaced the entire shell, only to have the new shell crack again. Cracks around the motor mounts can cool was spinning, 45° dives into the ground, entire loss of an engine and complete detachment of the motor from the Phantom.
The safe and prevent this from happening. Order the SubFrame today.
You will find the phantoms arms will be rocksolid thereby eliminating twisting from moter torque which in turn will reduce stress on the shell.