DJI PHANTOM 4 PROPS (SET OF 2) CW&CCW
All-new twist on propellers
Another big change is the migration from threaded props to twist-on ones, working in a similar fashion to those found on the Inspire 1.
As with the Phantom 3, the Phantom 4 comes with four pairs of props, giving the owner two full sets.
Each of the props comes factory sealed. We suggest leaving the seals on until they are used to differentiate between your new and used propellers.
Fitting Phantom 4 propellers
As per the warning on the arm stickers, ensure that the propeller is securely installed before flying. Match black ring propellers with motors with black dots.
Match the band around the propeller cap to the motors. The black band on the propeller above should be fitted to the motor with the black dots on its cap shown below. It should not be possible to mismatch the propeller and motors.
Using one hand to hold the silver motor body in place, put the prop on top of the motor spindle and rotate it (clockwise for silver props, anti-clockwise for black props) around one-sixth of a turn whilst applying a tiny amount of downward pressure. You will feel the prop ‘snap’ into place if it has been done correctly.
Its impossible to get the incorrect propeller to lock-on to the wrong motor. You can test that the props are locked on correctly by turning the propeller from the end of the blade and looking to see if the motor cap rotates.